Basic Info.
Product Description
Dissolved air flotation machine
Dissolved air flotation machine (DAF) is manufactured by our factory and mainly used for solid-liquid separation and liquid-liquid separation. Flotation device will produce large amounts of tiny bubbles by dissolved gas and release system in the water, to make the adhesion in the waste water and water close to the density of solid or liquid particles, causing the whole condition of density smaller than water, and depend on the ascend to the surface flotage, so as to achieve the purpose of the liquid-solid separation, liquid-liquid separation.
Work Principle:
The air will be send by air compressor into air tank, then take in air dissolved tank by jet flow device, the air will be force to dissolve into water under 0.35Mpa pressure and forming dissolved air water, then send to air flotation tank. Under the circumstance of sudden release, the air dissolved in water will be dissolve out and form vast microbubble group, which will be fully contact the flocculating suspended matter in sewage, the suspended matter was sent by pump and flocculation after adding medicine, the ascending microbubble group will adsorb in the flocculated suspended matter, made its density reduce and floated to water surface, thus reach the purpose of removing SS and CODcr etc.
Feature:
1).Dissolved air pump edge bibulous the edge is inspiratory, pump pressurized mix within, gas to liquid efficient dissolving, small bubbles than 30 um.
2).Low voltage operation, the dissolved gas efficiency is as high as 99%, release rate as high as 99%.
3).Tiny bubbles and suspended particles of efficient adsorption, improve the SS remove effect.
4).Dissolved gas water dissolving efficiency 80-100%, than traditional dissolved gas floating high efficiency three times.
5).Pressure-capacity curve smooth, easy to achieve automatic control, easy to operate, easy maintenance, low noise.
Model and parameters:
| Model | Disposal | Equipment size (m) | dissolved air vessel size | With motor power | Equipment total weight | ||
| capacity | (mm) | ||||||
| (m3/h) | Length | Width | Height | (Kw) | (Kg) | ||
| YMRF-1 | 1 | 1 | 0.8 | 1 | Φ200 h800 | 1.5 | 300 |
| YMRF-3 | 3 | 1.7 | 1.2 | 2 | Φ300 h1000 | 2.2 | 800 |
| YMRF-5 | 5 | 2.5 | 1.5 | 2 | Φ300 h1500 | 2.2 | 1500 |
| YMRF-10 | 10 | 4.6 | 1.7 | 2 | Φ400 h3000 | 4 | 3600 |
| YMRF-20 | 20 | 5 | 2 | 2 | Φ400 h3000 | 4 | 5400 |
| YMRF-30 | 30 | 5.7 | 2 | 2.2 | Φ500 h3000 | 5.5 | 6300 |
| YMRF-40 | 40 | 6.3 | 2.2 | 2.2 | Φ500 h3000 | 5.5 | 7500 |
| YMRF-50 | 50 | 7.5 | 2.2 | 2.2 | Φ600 h3000 | 7.5 | 9100 |
| YMRF-60 | 60 | 8.3 | 2.2 | 2.2 | Φ600 h3000 | 7.5 | 10000 |
| YMRF-80 | 80 | 9 | 2.2 | 2.5 | Φ800 h3000 | 11 | 11500 |
| YMRF-100 | 100 | 11 | 2.2 | 2.5 | Φ800 h3000 | 15 | 13000 |
Our Services
1.Professional design for you
According to the actual needs of professionals will be free to design targeted programs and products to ensure efficient complete solution actual demand.
2.Strict product examination
Professional advanced processing equipment and skilled workers, to build an advanced DAF equipment.
3.Professional after sale service
For equipment installation, specialized personnel will provide overseas equipment installation guide, commissioning, operation, maintenance instructions.
4.Technical support
In the process of use, if you encounter any problems, we will always provide technical support for you.
Company Information
Qingdao Yimei environment project Ltd. Found in 1988,located in maxi Chinese military affairs harbour base Jiao Nan City.Occupy about 36,000 square metres, 15,000 square metres workshop building, have each kind of processing machine about 130 pcs, as one of Shandong Province environment protection industrial association trustee member unit, now have staff about 300 person, 72 engineers and technicians, mainly engaged in the environment project, environmental protection equipment design and manufacture, water treatment technological development, engnieering construction, technical service and series of products of client customized.
We have the well experienced engineer, strong specialized production base, advanced manufacturing facilities, and can supply the first-rate product and special field consulting service.
In the long rang concentrates efforts on environment protection cause investing in construction, complete sets of equipment and project overall contracting.
FAQ
1. How to buy your idea products? A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).
2. How to pay? A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
3. What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
4. How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
5. How to keep your equipments from corrosion?
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
6. How do you manufacture your equipment ?
A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.
7. How to install after the equipments arriving destination? A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.